How to Manual Setup Yi Technology Dome Camera Again

Thank yous for choosing the YI Outdoor Photographic camera 1080p

What's in the Box

Getting to Know Your Photographic camera

Pairing Your Camera

a. Ability on the Camera
Place the camera close to the router, and make sure Wi-Fi admission is available, then connect the cable to the Micro USB port on the back of the photographic camera to power the outlet as shown.
The camera indicator volition flash yellow and y'all volition hear the introductory letters " Welcome to YI Home Camera", followed by "Waiting to connect".

b. Connecting to the YI Dwelling App
Step ane
Download the YI Home App and annals a YI Home account.
Pace 2
– Ensure that your cell phone is connected to your local 2.4GHz Wi-Fi network.
– Enable the "Location" function on your phone.
– Authorize the "Location" function of the YI Home app.

http://xiaoyi.com/en/home/app/united states.html

Footstep three
Log in to your YI Home account and tap the "+" symbol in the top-right, select the "YI Outdoor Security Camera" so tap the "I heard 'Waiting to connect" button.
Step 4
Enter your Wi-Fi network password and tap the "Delight choose Wi-Fi" push. A QR code will appear on your telephone's screen. Point the QR code towards the photographic camera lens until y'all hear the following letters "QR code scan is successful,
connecting to Wi-Fi" and "Wi-Fi is continued".
Pace five
Tap the "Next" button. Y'all will hear the message "Pairing is successful, you lot can start using your photographic camera now" both from the camera and from the app. Assign your desired name to the camera and tap the buttons "Salve" and "Yous may start using your camera now".
2.4Ghz Wi-Fi required
Your YI Outdoor Camera AI+ is at present set up to employ.

Mounting Instructions

Step 1
Plan the road of the cable from the power outlet to the photographic camera and choose an advisable spot.

Step ii
Use anchors and screws to mount the base to the wall.
If the wall is wooden, you can screw the mountain directly into the wall.
Step iii
Adhere your camera to the mounting base. Suit the camera angle to a suitable position, then tightly lock the universal ball mount.
Footstep 4
Use the cable clips to fasten the power cablevision. Ensure that you exercise not o-over-spike the cable clips.

While mounting, pay attention to the following: If you lot exercise not want to mount your camera to a wall, use the included camera stand to place your photographic camera anywhere.

Specifications

• Maximum resolution: 1920 ten 1080
• Lens: Wide-angle
• Audio: Built-in mic / speaker
• Photographic enhancement: 3D digital noise reduction
• Alert mode: Face detection, Man detection
• Weather Resistant Class: IP65
• Night vision: IR Cut+Infrared LEDs
• Back up platform: Android / iOS
• Wireless encryption: WEP / WPA / WPA2
• Length of USB cable: 3 meters
• Power supply: DC 5V / 1A

FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the post-obit ii weather condition: (one) This device may non cause harmful interference, and (2) this device must take any interference received, including interference that may cause undesired functioning. Changes or modifications not expressly approved by the party responsible for compliance could void the user'southward authority to operate the equipment. The altitude betwixt user and products should be no less than 20cm This equipment has been tested and plant to comply with the limits for a Class B digital device, pursuant to part fifteen of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and tin radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, at that place is no guarantee that interference will non occur in a particular installation. If this equipment does crusade harmful interference to radio or television reception, which can exist determined by turning the equipment off and on, the user is encouraged to attempt to correct the interference past one or
more of the post-obit measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a excursion different from that to which the receiver is continued.
—Consult the dealer or an experienced radio/ TV technician for help.
IC WARNING
This device contains license-exempt transmitter(s)/receiver(south) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(due south). Functioning is subject to the following two conditions:
(ane) This device may not crusade interference.
(2) This device must have any interference, including interference that may cause undesired operation of the device.
The distance between user and products should be no less than 20cm

Hereby we: Shanghai Xiaoyi Engineering Co., Ltd., declares that the radio equipment: YHS.3120 is in compliance with Directive 2014/53/ EU.
ProductType: YHS.3120
Wi-Fi: two.4GHz ,802.11b/g/n
Max RF power: 17dBm
Manufacturer: Shanghai Xiaoyi Technology Co., Ltd.
Accost: Building 18, NO.55 Chuanhe Route, Pudong New District, Shanghai, China
The full text of the Eu declaration of conformity is available at the following cyberspace address: https://kamistore.european union/pages/product-certification
Manufacturer: Shanghai Xiaoyi Technology Co., Ltd.
http://www.yitechnology.com
H32GA V1.0

FCC ID: 2AFIB-YHS3021
IC: 20436-YHS3021
HVIN: YHS.3121

Documents / Resources

weingartnerfrivinse.blogspot.com

Source: https://manuals.plus/yi-technology/yhs3120-outdoor-camera-1080p-manual

Share this post